Setting Speed Control; Resuming A Set Speed - Ford Escape 2005 Owner's Manual

Driver Controls

Setting speed control

The controls for using your speed
control are located on the steering
wheel for your convenience.
1. Press the ON control and release
it.
2. Accelerate to the desired speed.
3. Press the SET ACC control and
release it.
4. Take your foot off the accelerator
pedal.
5. The indicator light on the
instrument cluster will turn on.
Note:
• Vehicle speed may vary momentarily when driving up and down a
steep hill.
• If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
• If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.

Resuming a set speed

Press the RSM control and release
it. This will automatically return the
vehicle to the previously set speed.
The RSM control will not work if the
vehicle speed is not faster than 30 mph
(48 km/h).
66
2005 Escape (204)
Owners Guide (post-2002-fmt)
USA_English (fus)
ON
OFF
RSM
SET
ACC
CST
RSM
SET
ACC
CST