Advertisement
OWNER'S MANUAL
6v Battery-Powered Ride-On
,
THIS MANUAL CONTAINS IMPORTANT
SAFETY
PERFORMANCE
AND
.
MAINTENANCE
INFORMATION
READ THE MANUAL BEFORE TAKING
YOUR FIRST RIDE OR ALLOWING YOUR CHILD TO RIDE YOUR
NEW
-
.
E
E L
C
T
R
C I
R
D I
E
ON TOY
KEEP THE MANUAL HANDY FOR FUTURE
.
REFERENCE
DO NOT RETURN TO STORE!
QUESTIONS OR COMMENTS?
STOP
1-800-288-1560
FOR AGES 3 +
MAXIMUM WEIGHT: 65 lbs. (29.5 kgs)
NOTE: Illustrations in this Manual are for reference purposes only and may not reflect the exact
appearance of the actual product. Specifications are subject to change without notice.
Advertisement
Table of Contents
Related Manuals for Dynacraft BMWi9 Concept
Summary of Contents for Dynacraft BMWi9 Concept
- Page 1 OWNER’S MANUAL 6v Battery-Powered Ride-On THIS MANUAL CONTAINS IMPORTANT SAFETY PERFORMANCE MAINTENANCE INFORMATION READ THE MANUAL BEFORE TAKING YOUR FIRST RIDE OR ALLOWING YOUR CHILD TO RIDE YOUR ON TOY KEEP THE MANUAL HANDY FOR FUTURE REFERENCE DO NOT RETURN TO STORE! QUESTIONS OR COMMENTS? STOP 1-800-288-1560...
- Page 2 TABLE OF CONTENTS A Introduction, Safety and Warnings B Before You Begin Assembly C Parts Diagram D Assembly E How to Use Your Vehicle F Detailed Maintenance and Repair G Troubleshooting Guide H Warranty ELECTRIC CAR SPECIFICATIONS SUITABLE AGE CAPACITY up to 65lbs (29.5kgs) SPEED 2.5 mph...
- Page 3 INTRODUCTION, SAFETY, AND WARNINGS ABOUT THIS MANUAL: This Manual was written to help you and your child get the most performance, comfort, enjoyment and safety when riding your new electric ride- on toy. It is important for you to understand your new electric ride-on toy. By reading this manual before you let your child go out on his/her first ride, you will know how to get the most from your new electric ride-on toy.
- Page 4 Always wear appropriate clothing and shoes, including long sleeved shirts and long pants and lace-up or similar shoes with rubber soles. Never ride barefoot or in sandals and make sure that shoelaces or other fasteners are tied and kept away from the wheels and drive system of the ride-on toy.
- Page 5 SAFE RIDING PRACTICES AND WARNINGS • Check and obey all local laws or regulations which may be in effect in the locations where the electric ride-on toy may be used. • Always wear a helmet and other safety equipment and appropriate clothing and shoes.
- Page 6 • Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with wheels or other moving parts. • Before each cycle of operation, you must perform the preoperation checks specified in this manual or by the manufacturer, including: •...
- Page 7 BEFORE YOU BEGIN ASSEMBLY WARNING Remove all packing and items from the display box. Make sure that the power switch is turned “OFF” before assembling the electric ride-on toy. ESTIMATED ASSEMBLY TIME You should allow approximately 35 minutes for assembly, not including initial charging time.
-
Page 8: Parts Diagram
Parts Diagram Box Wrench(included) Plastic Body Assembly x1 Gear Box x1 Rear Wheel Axle x1 Driving Wheel x1 Windshield x1 Ø 12 Washer x8 M10 Lock Nuts x4 M5x45 Machine Screw x1 Ø 12 Bushing x3 Steering Wheel x1 Front Wheel & Rear Left Wheel x3 Steering Column x1 View Mirror x2 Axle Cap x4... - Page 9 ASSEMBLY Your new vehicle requires adult assembly. Please set aside around 35 minutes for assembly. Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. Tools Required: Standard slip joint pliers 17mm Box Wrench Phillips Screwdriver (included)
-
Page 10: Rear Axle Assembly
2. Rear Axle Assembly . Turn the vehicle body upside down. . Remove all parts from rear axle. . Slide a Ø 12 washer onto the rear axle from the longer end. . Insert the rear axle through the hole in the vehicle body. - Page 11 4. Steering Column Assembly . Turn the vehicle body on its side as shown in picture below. . Slide a 10 washer onto the steering column from the straight end. Ø . Insert the straight end of steering column up through the bottom hole at the front of vehicle body, and out through the hole in the dash.
- Page 12 8. Motorhood Assembly . Take out the motorhood from polybag. . Install the motorhood in the proper position as shown, by fitting the tabs on the motorhood into slots on the vehicle body. Note: Open ON/OFF button to check if the vehicle can move forward or backward before proceeding to next step.
-
Page 13: Battery Charging
BATTERY CHARGING IMPORTANT! Before first time use, charge the battery for at least 18 hours. Charge the battery for at least 12 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Over charging or undercharging the battery may shorten battery life and decrease vehicle running time. - Page 14 · Do not charge the battery on a surface (such as a kitchen counter top) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you charge your battery. · g i r h t i charge your vehicle battery.
- Page 15 HOW TO USE YOUR VEHICLE FORWARD 1. Shift the "Forward-Backward Shift Lever" to forward position. Press the Foot pedal, and the vehicle will move forward. STOP The vehicle will stop automatically, when your child’s foot is removed from the Foot pedal. Shift the "Forward-Backward Shift Lever"...
- Page 16 3. Adjust your audio device or MP3 player volume to low level and turn the power switch on your vehicle to the “ON” position. 4. Then adjust the volume to increase or decrease its sound level as desired. Note: MP3 player or Audio device not included. WARNING: Do not let use of an MP3 player or other audio device interfere with safe riding.
-
Page 17: Safety Precautions
SAFETY PRECAUTIONS Your new battery must be charged for at least 18 hours before you use it in your vehicle for the first time. The child must have adult supervision at all times. Do not ride on the road, footpaths, near pools, or bodies of water. Do not allow children under the recommended age to ride the vehicle;... - Page 18 DETAILED MAINTENANCE AND REPAIR Turn power “OFF” before conducting any maintenance procedures. Tools Required: Flat head Screwdriver 17mm Box Wrench (not included) (included) HOW TO REPLACE FRONT WHEELS & REAR LEFT WHEEL Remove the Axle Cap with a flat head screwdriver. Remove the M10 locknut with a 17mm socket wrench.
- Page 19 HOW TO REPLACE DRIVING WHEEL AND GEAR BOX Remove the Axle Cap with a flat head screwdriver. Remove the M10 locknut with a 17mm socket wrench. Remove the Ø12 washer. Remove the driving wheel, and replace with new wheel. If you do not need to replace the gear box, please proceed to step 9. Turn the lock knob on the seat to "unlock"...
- Page 20 HOW TO REPLACE THE POWER SWITCH Remove the power switch with a flat head screwdriver (not included). Unplug the main connector from the power switch socket as shown. Plug in the new power switch for replacement. HOW TO REPLACE THE FOOT PEDAL Turn the vehicle body on its side.
-
Page 21: Battery Care And Disposal
BATTERY CARE AND DISPOSAL Do not store the battery in temperatures above 75° F (23.5° C) or below 32° F (0°C). THIS PRODUCT CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN ACCORDANCE WITH YOUR LOCAL AND STATE LAWS. PLEASE CAREFULLY READ AND UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS: Disposal: This product contains sealed lead acid batteries which must be disposed of... - Page 22 MAINTAINING YOUR VEHICLE Occasionally use a lightweight oil to lubricate moving parts such as wheels and the steering linkages. Park the vehicle indoors or cover it with a tarp to protect it from wet weather. Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts may melt.
-
Page 23: Troubleshooting Guide
“Replace only with an original 6 Volt (7.0 Amp/Hr.) battery with built-in thermal fuse. Do not use non- original substitute parts. Visit the Dynacraft website and replace with Motor damage a new motor. Check all wires and connectors. Make sure... - Page 24 Problem Possible Cause Solution Tripped thermal fuse The built-in thermal fuse may “trip” and shut down operation of the vehicle if the vehicle is overloaded or the driving conditions too r t “ ” d power switch to the "OFF" position, release the foot pedal, and wait approximately 2 minutes before operating the vehicle again.
- Page 25 Problem Possible Cause Solution Vehicle runs sluggishly Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After first- time use, recharge the battery for at least 12 hours after each use.
-
Page 26: Limited Warranty
Parents that allow their children to ride taking such actions will assume their own risk and the risk of injury to their children, and Dynacraft will not be responsible. THE PURCHASE OF THIS ELECTRIC RIDE-ON TOY WILL CONFIRM THE BUYER’S AGREEMENT THAT DYNACRAFT’S LIABILITY UNDER THIS WARRANTY SHALL BE NO... -
Page 27: Customer Service
Having this information is required and helps us handle your call more effectively. DO NOT return this item to the store. STOP Please call Dynacraft for assistance. Dynacraft BSC, Inc. 2014 Printed in China 89 S. Kelly Rd., American Canyon, CA 94503 Call Toll Free 1.800.288-1560...