Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Dynacraft Hello Kitty
Summary of Contents for Dynacraft Hello Kitty
- Page 1 OWNER’S MANUAL FOR ELECTRIC RIDE-ON VEHICLES This manual contains important safety, performance and maintenance information. Read the manual before taking your first ride on your new ride-on vehicle, and keep the manual handy for future reference. REGISTER your bike online at www.dynacraftwheels.com...
- Page 2 OWNER’ S MANUAL HELLO KITTY KARAOKE CAR THIS MANUAL CONTAINS IMPORTANT SAFETY, PERFORMANCE AND MAINTENANCE INFORMATION. READ THE MANUAL BEFORE TAKING YOUR FIRST RIDE OR ALLOWING YOUR CHILD TO RIDE YOUR NEW ELECTRIC RIDE-ON TOY. KEEP THE MANUAL HANDY FOR FUTURE REFERENCE.
- Page 3 TABLE OF CONTENTS Introduction, Safety and Warnings Before You Begin Assembly List of Assembled Parts Assembly How to Use Your Vehicle Detailed Maintenance and Repair Troubleshooting Guide Warranty ELECTRIC CAR SPECIFICATIONS SUITABLE AGE CAPACITY up to 65lbs (29.5kgs) SPEED 2.5 mph CHARGER / INPUT AC120V / 60HZ OUTPUT...
- Page 4 INTRODUCTION, SAFETY, AND WARNINGS ABOUT THIS MANUAL: This Manual was written to help you and your child get the most performance, comfort, enjoyment and safety when riding your new electric ride - on toy. It is important for you to understand your new electric ride-on toy. By reading th is manual before you let your child go out on his/her fi rst ride, you will know how to get the most from your new electric ride-on toy.
- Page 5 Always wear appropriate clothing and shoes, including long sleeved shirts and long pants and lace-up or similar shoes with rubber soles. Never ride barefoot or in sandals and make sure that shoelaces or other fasteners are tied and kept away from the wheels and drive system of the ride-on toy.
- Page 6 SAFE RIDING PRACTICES AND WARNINGS Check and obey all local laws or regulations which may be in effect in the ● locations where the electric ride-on toy may be used. Always wear a helmet and other safety equipment and appropriate clothing and ●...
- Page 7 Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come in ● contact with wheels or other moving parts. Before each cycle of operation, you must perform the preoperation checks specified ● in this manual or by the manufacturer, including: That all guards and pads originally supplied by the manufacturer are in proper place ●...
- Page 8 BEFORE YOU BEGIN ASSEMBLY WARNING Remove all packing and items from the display box. Make sure that the power switch is turned “OFF” before assembling the electric ride-on toy. ESTIMATED ASSEMBLY TIME You should allow approximately 25 minutes for assembly, not including initial charging time.
- Page 9 LIST OF ASSEMBLED PARTS Seat Main body Assembly Windshield Audio Input Cable View mirrors Microphone Steering wheel set Hardware in poly bag Steering Column Charger If you experience a problem with this product, or are missing a part, please call us at 1-800-288-1560, rather than return this product to the store. Please identity all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
-
Page 10: Parts Diagram
PARTS DIAGRAM Note: Some parts shown are assembled on both sides of vehicle. Plastic Body Assembly M5x35 Machine Screw View Mirrors Rear Wheel M10 Lock Nuts Front Wheel Ø 10 Washer Gear Box Seat Charger Ø 5 nut Windshield M5x16 Machine Screws Bushing Steering Column Microphone... - Page 11 ASSEMBLY Your new vehicle requires adult assembly. Please set aside around 25 minutes for assembly. Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. Tools Required: Standard slip joint pliers (not Phillips Screwdriver (not included) included) WARNING:...
- Page 12 2. Steering Wheel Assembly Put the vehicle body upright. ● Remove the M5×35 machine ● screw and Ø5 nut from the steering wheel. Insert the steering wheel to the ● end of the steering column. Insert the M5x35 machine ● screw through the steering wheel and steering column (make sure to align their holes),...
- Page 13 5. View Mirrors Assembly Insert the view mirror into the hole in ● the vehicle body and push until you hear this click into place. Repeat for the other side. ● 6. Connect Audio Input Cable Plug the audio input cable on AUX ●...
- Page 14 Battery Safety Notice: Batteries may leak fluids that can cause chemical burn injury or ruin your product. To avoid battery leakage: Install batteries correctly, observing the polarity (+,-) signs to avoid leakage. ● Do not mix old and new batteries. ●...
-
Page 15: Battery Charging
BATTERY CHARGING IMPORTANT! Before first time use, charge the battery for at least 18 hours. Charge the battery for at least 12 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Over charging or undercharging the battery may shorten battery life and decrease vehicle running time. - Page 16 Do not charge the battery on a surface (such as a kitchen counter top) ● which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you charge your battery. Use only an original charger (120VAC 60Hz) with an output of 6 VDC ●...
- Page 17 HOW TO USE YOUR VEHICLE FORWARD 1. Move the “Forward - Backward switch” into the “Forward” position. 2. Press the “Foot pedal”, and the vehicle will move forward. STOP The vehicle will stop automatically when you d l i s ’ “...
- Page 18 AUDIO INPUT JACK Use the audio input cable (included) to connect your MP3 player or other compatible audio device with this vehicle to listen to and enjoy music. 1. Plug one end of the audio input cable (included) into the audio input jack on the vehicle as shown.
-
Page 19: Safety Precautions
IMPORTANT Always stop vehicle when changing the direction to avoid damage to the gears and motor. This vehicle has an adjustable play seat belt; please instruct children on how to fasten the seat belt before using. Do not let any child touch the wheels or be near them when the car is ... - Page 20 DETAILED MAINTENANCE AND REPAIR Turn po wer “ OFF” before conduct ing any mainte nance procedures. Tools Required: Flat head Screwdriver 17mm Socket Wrench (not included) (not included) HOW TO REPLACE FRONT WHEELS Remove the Axle Cap with a flat head screwdriver. Remove the M10 locknut with a 17mm socket wrench.
- Page 21 HOW TO REPLACE REAR WHEEL AND GEAR BOX 1. Remove the Axle Cap with a flat head screwdriver. 2. Remove the M10 locknut with a 17mm socket wrench. 3. Remove the Ø10 washer. 4. Remove the driving wheel, and replace with new wheel. If you need to replace the gear box, please proceed to the next step.
- Page 22 HOW TO REPLACE THE POWER SWITCH Remove the power switch holder with a flat head screwdriver (not included). Take out the holder as shown. Unplug the main connector from the power switch as shown. Push down the clips on both sides of the switch (see 4 -1), take out the switch from the holder (see 4-2), and then replace with a new switch.
-
Page 23: Battery Care And Disposal
BATTERY CARE AND DISPOSAL Do not store the battery in temperatures above 75° F (23.5° C) or below 32° F (0°C). THIS PRODUCT CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN ACCORDANCE TO YOUR LOCAL AND STATE LAWS. PLEASE CAREFULLY READ AND UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS: Disposal: This product contains sealed lead acid batteries which must be disposed of... - Page 24 MAINTAINING YOUR VEHICLE Occasionally use a lightweight oil to lubricate moving parts such as wheels and the steering linkages. Park the vehicle indoors or cover it with a tarp to protect it from wet weather. Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts may melt.
-
Page 25: Troubleshooting Guide
6 Volt (7.0 Amp/Hr.) battery with built-in thermal fuse. Do not use non- original substitute parts. Visit the Dynacraft website and replace with Motor damage a new motor. Check all wires and connectors. Make sure... - Page 26 Problem Possible Cause Solution Tripped thermal fuse The built-in thermal fuse may “trip” and shut down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once a fuse has “tripped”, release your foot form the pedal of vehicle an minutes before operating the vehicle again.
- Page 27 Problem Possible Cause Solution Vehicle runs sluggishly Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After first- time use, recharge the battery for at least 12 hours after each use.
-
Page 28: Limited Warranty
Parents that allow their children to ride taking such actions will assume their own risk and the risk of injury to their children, and Dynacraft will not be responsible. THE PURCHASE OF THIS ELECTRIC RIDE-ON TOY WILL CONFIRM THE BUYER’S AGREEMENT THAT DYNACRAFT’S LIABILITY UNDER THIS WARRANTY SHALL BE NO... -
Page 29: Customer Service
Having this information is required and helps us handle your call more effectively. DO NOT return this item to the store. STOP Please call Dynacraft for assistance. Dynacraft BSC, Inc. 2014 Printed in China 89 S. Kelly Rd., American Canyon, CA 94503 Call Toll Free 1.800.288-1560... - Page 30 Please visit dynacraftwheels.com for more information. Or call Customer Service at 1-800-288-1560, 7AM to 4PM PST. Please have the following information available when you call: Model Number: (example: 8XXX-XX) Production Date: (example: 2014.XX.XX) Serial Number: (example: XXXXXXXXXXX) 2015 Printed in China...