Page 1
OWNER’S MANUAL PUSH-N-PLAY this manual contains important safety performance and maintenance information read the manual before taking your first ride or allowing your child to ride your push play ride on toy keep the manual handy for future reference DO NOT return this item to the store. QUESTIONS OR COMMENTS? 1-800-551-0032 FOR AGES 18 MONTHS –...
INTRODUCTION, SAFETY AND WARNINGS ABOUT THIS MANUAL: This Manual was written to help you and your child get the most performance, comfort, enjoyment and safety when riding your new Push- N-Play ride-on toy. It is important for you to understand your new Push-N-Play ride-on toy.
Page 4
RIDER USE AND REQUIRED PARENTAL SUPERVISION RIDERS MUST NOT EXCEED THE WEIGHT LIMIT OF 45 pounds (20 kg) and MUST BE OVER 18 MONTHS OLD. The age grade for the Push-N-Play ride-on toy is for ages 18 months – 5 years. Just because your child is within the age and weight limitations specified for the Push-N-Play ride-on toy, does not mean that his/her size is appropriate to fit or maintain control of the Push-N-Play ride-on toy, or that he/she is capable of...
Page 5
SAFE RIDING PRACTICES AND WARNINGS • Check and obey all local laws or regulations which may be in effect in the locations where the Push-N-Play ride-on toy may be used. • Always wear appropriate clothing and shoes. • Observe the age and weight limitations on the cover of this manual. •...
Page 6
• Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with wheels or other moving parts. • Before each cycle of operation, you must perform the pre-operation checks specified in this manual, including: –...
ASSEMBLY Your new vehicle requires adult assembly. Please set aside around 20 minutes for assembly. Please identify all parts before assembly and save all packaging material until assembly is completed to ensure that no parts are discarded. TOOLS REQUIRED: Phillips Screwdriver (not included) WARNING: THE PUSH-N-PLAY IS TO BE ASSEMBLED BY AN ADULT.
Page 8
3. FRONT WHEELS Front wheel • Note different shapes of wheel pegs and corresponding slots on vehicle body. • Insert one front wheel assembly into correct slot on body, and snap into place. • Repeat for other side, and ensure that front wheels are completely seated.
Page 9
6. ROOF Front • Place roof into position on front window assembly window and rear window assemblies. • Tighten five screws with Phillips screwdriver. Roof CAUTION: Overtightening screws may result in damage. Screw 7. HOOD Front window assembly • Insert hood assembly tabs into slots on car body.
8. DASHBOARD Steering Screw wheel • Attach decal to dashboard. assembly • Slide steering wheel assembly into slot on dashboard. • Tighten screw with Phillips screwdriver. CAUTION: Overtightening screw may result in damage. Decal BATTERY INSTALLATION • Remove screw from battery cover with Phillips screwdriver.
MAINTENANCE BEFORE EACH RIDE Before each ride, check your Push-N-Play ride-on and its components against the following checklist. In addition, if you have a crash or accident, even a minor one, always inspect the Push-N-Play thoroughly before riding again. • Check that wheels are straight. •...
SAFETY PRECAUTIONS • Children must have adult supervision at all times. • Do not ride on the road, footpaths, near pools, or bodies of water. • Do not allow children under the recommended age to ride the vehicle; please refer to the age grading. •...
REGISTRATION REGISTER YOUR PUSH-N-PLAY RIDE-ON TOY PURCHASE ONLINE AT www.dynacraftwheels.com REGISTRATION Model number or description: ________________________________________________ Serial Number: _____________________________________________________________ Name: _____________________________________________________________________ Address: __________________________________________________________________ City: ______________________________________________________________________ State: _____________________________ Zip: __________________________________ E-mail Address: ____________________________________________________________ Date of purchase: ___________________ User’s date of birth: ____________________ Date of birth or person whose name appears above: ___________________________ Place of purchase: __________________________________________________________...
LIMITED WARRANTY Subject to the following limitations, all Push-N-Play ride-on toys manufactured for Dynacraft are warranted to the original purchaser to be free of defects in materials and workmanship for a period of one year from the date of purchase...
Page 16
1-800-551-0032 7AM to 4PM Pacific Standard Time DO NOT return this item to the store. STOP Please call Dynacraft for assistance. Please have the following information available when you call: Model Number: (sample: 8802-33) Production Date: (sample: 03.03.2015) Serial Number: (sample: DA0233HD00001) Having this information will be required and helps us handle your call more effectively.
Need help?
Do you have a question about the Push- N-Play and is the answer not in the manual?
Questions and answers