Setting Functions; Displaying Information - Fujitsu P24W-6 IPS Operating Manual

Operation

Setting functions

Input select
Language
DDC-CI
OSDTimeout
Factory recall

Displaying information

26
Downloaded from ManualMonitor.com Manuals
Call up the Setup settings window
Select the input signal
This function is used to select the input signal (VGA, DVI or DP).
This is on condition that the display adapter supports this function.
Set the language for the OSD menu
With this function you select the language for the OSD menu.
The default setting is English.
Activates/deactivates the DDC-CI function
On = The DDC-CI function is activated (default setting)
Off = The DDC-CI function is deactivated
Set the display duration of the OSD menu
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is
automatically faded out.
Activate the factory settings
With this function all settings are reset to the factory settings without
prompting for confirmation.
The function is executed with the
cable, an Auto Processing message is displayed. The language selection
menu appears.
Call the Information setting window
With this function the model designation, serial number, resolution, H/V
frequency, input signal, colour setting and polarity of the synchronisation
signal are displayed.
button. If you are using a VGA data
Fujitsu Technology Solutions