Osd Menu Functions; Adjusting The Brightness And Contrast; Selecting The Application Mode - Fujitsu P24W-6 IPS Operating Manual

Operation

OSD menu functions

The OSD menu for analogue monitor operation is described below. During
digital operation some functions are not available, they are not needed because
of the digital transmission technology being used.

Adjusting the brightness and contrast

Brightness
Contrast
Black level
Auto Brightness
Auto level
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.

Selecting the application mode

D mode
Office
Photo
Video
ACR = Dynamic contrast (on / off)
24
Downloaded from ManualMonitor.com Manuals
Call up the Brightness/Contrast setting window
Set the brightness of the display
With this function you change the brightness of the background lighting.
Set the contrast of the display
With this function you modify the contrast of bright colour tones.
Set the brightness of the display
With this function you modify the contrast of dark colour tones.
Automatic brightness control
This function is used to automatically control the brightness of the
background lighting using the light sensor.
On = The brightness is adjusted according to the ambient brightness
Off = The brightness is adjusted manually by the user
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed by clicking the
Call up the Mode setting window
Setting for DICOM simulation (the values for colour and ACR are locked:
Colour = 7500K, ACR = off)
Office presets (the settings for colour and sharpness can be adjusted)
Photo presets (colour, sharpness, saturation, ACR)
Video presets (colour, sharpness, saturation, ACR)
button.
Fujitsu Technology Solutions