Mix Features - SoundCraft Si impact User Manual

MIX FEATURES

Si Impact Mix Features include mix functions outside the normal audio signal path: Mute Groups,
VCA Groups, Copy and Paste, Interrogate, the Solo system, Monitoring, and the CLR and ALT +
CLR facilities.
8.1: Mute Groups
Set up groups of channels that can be muted with a single button press. You can create up to eight mute
groups, operated by the Mute/VCA Group Master buttons 1-8. While not is VCA setup mode, the buttons
are Mute Group selectors. Mute groups are cumulative, so activating a second Mute Group Master will add
those channels to the number of muted channels.
8.2: VCA Groups
Set up groups of channels with faders controlled by a VCA Master fader (which is assigned to a Control
Channel). You can create up to eight VCA Groups using the VCA SETUP button and the Mute/VCA group
Master buttons 1-8.
8.3: Copy & Paste
Copy then Paste whole channels, channel sections, FX settings, and Mix bus, FX send, and Matrix bus
mixes. Press the PASTE button in the Touch Screen Main Menu to begin the process.
8.4: Audio Interrogate
Interrogate and change the status of ACS button across every channel simply by pressing and holding that
button. For example, check the status of all channels in one go! Press and hold the button to enter Interro-
gate mode.
8.5: Solo System
Listen to individual channels on the monitor mix or main mix (Solo In Place). The automatic solo mode
function chooses PFL or AFL depending on where one or more channels are soloed.
8.6: Monitoring
The Engineer's mix. Solo system integration, delay, mono check, and patchable outputs,
8.7: CLR & ALT + CLR
Special modifier buttons for clearing or resetting individual channel settings or settings across the whole
console.
User Manual 8.0: MIX FEATURES
8.1: MIX FEATURES > MUTE GROUPS 8.0: MIX FEATURES