Totem™ (The One Touch Easy Mix) Keys - SoundCraft Si Compact Quick Start Manual

tOTEM™ (THE ONE TOUCH EASY MIX) KEYS
These keys place the console into 'MIX' mode allowing quick & easy mixing from Channels
to Buses, Channels to FX or Buses to Matrix. Pressing any key triggers a sequence of events
that re-configure the control surface and console monitoring system to the optimum layout
for the desired/required function.
Aux Buses 1:14
• Clears all current SOLOs.
• Sets fader bank to IN A (if not currently on IN A or IN B bank).
• Puts input faders into 'sends on faders' mode lighting fader glow according to the PRE
or POST setting of the bus.
• Places BUS MASTER for selected bus on the MONO fader.
• SOLOs the selected bus.
• Selects the ACS to the appropriate Aux bus.
FX Buses 1:4
• Clears all current SOLOs.
• Sets fader bank to IN A (if not currently on IN A or IN B bank).
• Puts faders into 'sends on faders' mode lighting fader glow accordingly.
• Places FX Return of fader for selected bus on the MONO fader.
• SOLOs the appropriate FX Return channel.
• Selects the ACS to the appropriate FX Return channel.
NOTE: This function may only be enabled if an FX processor is patched to a Stereo
Return channel; this is achieved from the PATCH function in the inputs window.
Matrix Buses 1:4
• Clears all current SOLOs.
• Puts faders into BUS mode if not currently already selected.
• Puts faders into 'sends on faders' mode lighting fader glow accordingly.
• Places MATRIX MASTER for selected bus for selected bus on the MONO fader.
• SOLOs the selected bus.
• Selects the ACS to the appropriate Matrix bus.
NOTE: Use ALT + MTX to have MONO and LR faders send to the selected matrix MONO,
L & R meters.
10
Soundcraft Si Compact Quick Start Guide 0311