Assignable Controls - SoundCraft Si impact User Manual

ASSIGNABLE CONTROLS

At the heart of the Si Impact is a group of assignable controls that make the console easier and
faster to navigate and operate. Assignable controls work by changing the function of sections of the
console surface. In this way, a single control can do several jobs, depending on the mode the
console is working in. It is important that you understand the assignable controls on the console in
order to use it effectively - especially the way in which the FADERS and tOTEM buttons together
determine the functionality of the Control Channels and Faders.
The main assignable controls on the console are:
Control Channels
These are the vertical strips containing a Fader, Encoder, Status/Meter screen, plus the SOLO, SEL, and ON
switches. They are assigned to control real input and output channels as well as GEQ bands and bus Masters. A group of
Control Channels makes a Fader Layer.
Fader Layers (Selected with the FADERS button group)
Switch between whole layers of Control Channels. There are four DSP Control Channel Fader Layers and two GEQ
(Graphic EQ) Fader Layers.
Assignable Channel Strip (ACS)
Used to control nearly all parameters on the active channel. Press a Control Channel SEL button to 'focus' the ACS.
tOTEM
'The One Touch Easy Mix' system used to assign Mix, Matrix, and FX Send busses to the Control Channel Faders.
User Manual 3.0: ASSIGNABLE CONTROLS
3.0: ASSIGNABLE CONTROLS