SoundCraft Si impact User Manual page 30

INPUTS AND OUTPUTS > PATCHING > SOUNDWEB
The console can control BSS Soundweb London devices' preamp controls via
Harman's HiQnet protocol. When a digital audio transport card (Dante, BLU Link, Cobranet, etc.) is
installed and your Si console is connected to a network with Soundweb London devices via
the HiQnet port on the back of the console, you can now bring up the SOUNDWEB LONDON
EXTERNAL PREAMP control.
Soundweb External Preamp Control device setup is saved in show files and Mic Gain and 48V values can
be recalled with snapshots. Snapshot recall of these values can also be disabled with the ISOLATE feature
Network Settings
The first step to configuring Soundweb London devices is setting up the IP settings in the SYSTEM menu
on your Si console. The Soundweb London device and the console must be on the same subnet in order to
communicate. See chapter reference 11.2 for more detail.
Control Access
Press and hold a digital input patch icon to add Soundweb London external preamp control to that channel.
This will bring up the Soundweb London Control Menu (see below).
Note: Soundweb London preamps are controlled in 6dB increments. Trim control can be performed in 1dB
increments.
User Manual
5.1.1: INPUTS & OUTPUTS > PATCHING > SOUNDWEB
5.1.1: SOUNDWEB CONTROL