1: Main Mix Outputs Setup - SoundCraft Si impact User Manual

CHANNELS & BUSSES > MAIN MIX OUTS > SETUP
There are various Main LR and M-specific options, found via the Touch Screen Main Menu OUTPUTS button.
These offer naming, isolate, and physical output patching.
Name
Name the selected Main Output Bus.
When the Name field is selected, a QWERTY keyboard will appear on the Touch Screen so you can enter the desired
name.
Isolate
Isolate the Main Output Master DSP channel from automation playback.
When a new cue is loaded, this DSP channel will not be affected and its setting will not be changed. However, current
channel settings are still stored when a cue is stored.
Patching
Choose specific analogue and digital outputs for this DSP Channel.
Touching the value fields will bring up the standard Patching setup on the Touch Screen. Two outputs can be
allocated for both the L&R (Left and Right) and the M (Mono) channels. For more detail, please see section 5 - Inputs
& Outputs. The Mono output patches are also the Centre output patching when using LCR panning.
User Manual
6.4.1: CHANNELS & BUSSES > MAIN MIX OUTPUTS > SETUP

6.4.1: MAIN MIX OUTPUTS SETUP