Table of Contents

Advertisement

Macro mode is used for taking pictures of objects as close as 3 cm (1.2 in.). Note
that the flash may be unable to light the entire subject at distances of less than
50 cm (1 ft. 8 in.).
1
Press
~'t
(macro mode).
• The macro menu is displayed.
Macro mode
Rotate the zoom control to frame the picture.
• The closest distance at which the camera can focus
varies depending on the zoom position. At the zoom
position (wide angle position before the
~
icon)
where the
M
icon and zoom display glow green, the
camera can focus on subjects as close as 4 cm (1.6 in.)
from the lens. At the wide-most zoom position, the camera can focus on subjects as
close as 3 cm (1.2 in.) from the lens.
Use the multi selector .. or ... to choose ON
and press the
®
button.
• The macro mode icon (M) is displayed.
• If a settincj is not applied by pressing the
®
button
within a few seconds, the selection will be cancelled.
2
3
ra
Autofocus
When using macro mode, the camera focuses continuously until focus is locked by pressing the
shutter-release button halfway. A sound will be heard while the camera focuses.
ra
The Macrc» Mode Setting
The macro mode setting applied in
0
(auto) mode is stored in the camera's memory even after the
camera is turned off, and reapplied the next time
0
(auto) mode is selected.
37

Advertisement

Table of Contents
loading

Table of Contents