0' Motion Detection - Nikon Coolprix S570 User Manual

122
Basic Camera Setup: The Setup Menu
~.~
Motion Detection
Press the
MENU
button
-+ Y
(Setup menu)
(CD
113)
-+
~."II Motion detection
Enable motion detection to reduce the effects of subject movement and camera
shake when shooting still pictures.
Auto (default setting)
When the camera detects the camera shake or subject movement, the shutter
speed will be increased for reducing the effects of them.
However, motion detection does not function in the following situations
• When the flash mode is set to ~ (fill flash)
• When ISO sensitivity
(CD
99) is set to Fixed range auto or ISO sensitivity is
fixed at a particular value in
0
(auto) mode
• When Multi-shot 16
(CD
98) is enabled
• In the following scene modes: Dusk/dawn
(CD
37) and Fireworks show
(CD
39)
Off
Motion detection is not enabled.
The motion detection setting can be confirmed in the monitor while shooting
(OJ
6, 21).
The motion detection icon will glow green when the camera detects any vibration
and increases the shutter speed. When Off is selected, the icon for the current
setting is not displayed.
~
Notes on Motion Detection
• Motion detection may be unable to completely eliminate the effects of the subject movement
and camera shake in some situations.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• Pictures taken using motion detection may be somewhat grainy.