Table of Contents
Advertisement
Menu operation
1.
Connect the power and turn on the power switch.
2.
Extend the antenna.
3.
Use the CH +/- buttons to find the necessary channel.
4.
Use the VOL +/- button to regulate the volume level.
5.
Press the MENU button on the unit or remote control to select among different
Menu pages, i. e. Picture, Option, Clock, System and Preset.
Menu Picture
Press MENU to enter into menu Picture . Press CH +/- to select and press VOL +/- to
change setting.
a.
Contrast: Use CH +/- buttons to select this item, then press VOL +/- to
increase/decrease the contrast.
b.
Brightness: Use CH +/- buttons to select this item, then press VOL +/- to
increase/decrease the brightness.
c.
Color: Use CH +/- buttons to select this item, then press VOL +/- to
increase/decrease the color saturation.
d.
Sharp: CH +/- buttons to select this item, then press VOL +/- to
increase/decrease the sharpness.
Note: Only when displaying the picture of NTSC system, it will show the character of
TINT in the Picture menu.
Menu Option
Press MENU to enter into menu Option . Press CH +/- to select and press VOL +/- to
change setting.
a.
Language: Change OSD menu language among English, Russian, Chinese,
German, Portuguese, Spanish, Italian and Arabic.
9
Advertisement
Table of Contents
