Osd Operations; Menu Operation; Picture Menu; Geometry Menu - Hyundai H-LCD1502 Instruction Manual

OSD operations

Menu Operation

1. Press MENU button to display the main menu.
2. Press VOLUME UP/DOWN (VOL+/-) buttons to enter the needed menu.
3. Press PROGRAM DOWN (PROG-) button to highlight the desired menu/item.
4. Press VOLUME UP/DOWN (VOL+/-) buttons to adjust the setting.
5. Press MENU button to save setting and go back to last menu.
6. Press MENU button to exit the menu.
Note: The buttons on the front panel have the same functions as the corresponding RC buttons.

PICTURE MENU

Enter Picture menu. You can adjust following parameters:
brightness, contrast (to adjust the difference between the
light and dark areas of the picture), saturation (to adjust the
richness of the color), sharpness, hue, color tone, backlight
(to adjust the level of back light, depending on room
lighting), picture mode (to adjust the brightness, contrast,
saturation and sharpness of the picture simultaneously).
Notes: Saturation and sharpness are not available in PC mode. Hue is only available in NTSC
mode. For Color Tone: Cool is for a more blue palette of picture colors, Warm is for a more red
palette of picture colors, and Normal is between the two. Personal is only available in PC mode.

GEOMETRY MENU

Enter Geometry menu. The menu is only available in PC
and component input modes. You can adjust following
parameters: H-position (to adjust the horizontal position of
the picture), V-position (to adjust the vertical position of the
picture), H-size (to adjust the sampling frequency of A/D),
Phase (to adjust the sampling phase of A/D), AUTO (to
adjust the screen display to the best state automatically).
Notes: For H-size: the option is usually adjusted with H-position and V-position; this can make
picture get better quality. You also can use AUTO function to make picture better. For Phase: you
can adjust this value accordingly if there are close bright dots on the picture or linear shimmer
phenomenon happens.

SOUND MENU

Enter Sound menu. You can adjust following parameters:
volume, bass, treble, balance (to adjust how much loudness
is sent to the left and right speaker), surround (ON/OFF),
AV (auto volume level function ON/OFF).
Note: Surround and AV are not available in TV mode.
11