Note : Follow the disassembly procedure in the numerical order given.
3-1.
CASE
1 Two screws (Flat head)
3 Two screws (Flat head)
3-2.
D-AUDIO BOARD, FRONT PANEL
White lever
qa Connector (CN920)
qs Two Screws
(+BVTP 3X8)
qh
qd Screw (+BVTT 3X6)
7 Loading panel
5 Case
A
0 Connector (CN901)
qg Claw
qk
ql Front panel
6
Insert a screwdriver to the square hole on the bottom,
and slide the white lever in the arrow A direction to
open the tray.
Then remove the loading panel.
(CD-R/CD-RW Recorder (deck B) only.)
1 Connector (CN561)
2 Wire (Flat type)
(CN551)
qg Claw
qj
qf Four screws (BV /RING)
RCD-W2000ES
4 Screw (Flat head)
2 Two screws (Flat head)
5 D-AUDIO board
3 Connector (CN301)
8 Connector (CN340)
4 Six screws
9 Wire (Flat type) (CN671)
(+BVTP 3X8)
7