Note: Follow the disassembly procedure in the numerical order given.
2-1. UPPER CASE REMOVAL
1 Two tapping screws
2 Two tapping screws
2-2. RJ-79, NK-11 BOARD REMOVAL
3 RJ-79 board
5 NK-11 board
4 Connector
(CN751)
SECTION 2
DISASSEMBLY
3 Upper case
1 Two connectors
(CN951, 952)
2 Four screws
(BVTP3 × 12)
2-3. REAR PANEL REMOVAL
8 Rear panel
7 Claw
2 Connector
(CN361)
2-4. FRONT PANEL SECTION REMOVAL
2 Flat cable
(CN105)
3 Two claws
4 Claw
6 Front panel section
2-1
SLV-ED8/ED9
1 Two connectors
(CN101, 901)
3 Harness
4 Three claws
6 Claw
5 Two claws
1 Connector
(CN423)
5 Three claws