Locking The Osd Menu - Fujitsu P23T-6 IPS Operating Manual

Selecting input signal (D-SUB/DVI-D/HDMI)
► Press the
INPUT
► Press the ECO
monitor connection (VGA, DVI or DP).
► Press the MENU
/ button to cancel the process.
This setting window can also be called up when the OSD menu is locked.

Locking the OSD menu

The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the
on the monitor using the ON/OFF switch.

The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the ECO

The message ECO Mode ein or ECO Mode off appears.
If the ECO operating mode is activated, the following OSD settings are changed:
Mode
Colour
Brightness
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
/ button to call up the Input select settings window.
/ or the INPUT
/ button to confirm your selection or the
MENU / button for a few seconds while you switch
/ button to switch the ECO operating mode on or off.
Office
6,500 K
reduced
/ button to select the desired
Operation
AUTO
21