Fujitsu Siemens Computers SCENICVIEW A17-2A Operating Manual page 23

Adjusting the brightness and contrast
Calling the setting window
Brightness Setting the brightness of the display
With this function you change the brightness of the background lighting.
Setting the contrast of the display
Contrast
With this function you modify the contrast of bright colour tones.
If the contrast is set too high, bright surfaces can no longer be distinguished from very
i
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
Adjusting size and position
Calling the setting window
Performing auto-adjustment of the monitor
Auto
Adjustment
Picture quality and position are set to optimum values for your system.
H-Position Adjusting the horizontal position
With this function you move the picture to the left or to the right.
Adjusting the vertical position
V-Position
With this function you move the picture up or down.
Clock Setting synchronisation
With this function you adjust the picture width to eliminate vertical picture
disturbances.
Phase Eliminating picture interference
With this function you fine-tune your monitor to eliminate picture interference.
Adjusting the picture quality in case of interpolation
Sharpness
With this function you set the sharpness of the interpolation filter. Thus the display
can be optimised for pictures or texts.
A26361-K1098-Z120-1-7619, edition 1
Downloaded from ManualMonitor.com Manuals
15