peerless-AV CL-42PLC68-OB User Manual page 4

Outdoor hd display
Hide thumbs Also See for CL-42PLC68-OB:
Table of Contents

Advertisement

16. Under any circumstances, do NOT modify or disassemble this product as it may cause fi re,
electric shock, or severe damages to the product. Also any unauthorized modifi cations made to
the product automatically void product warranty.
17. Never touch antenna lines or wires, if applicable or power cables or power plugs in such
circumstances as lightning and thunder as it may cause electric shock.
18. Any severe physical impact on the product may cause certain components to fall out of place
within or to break, which may cause fi re or electric shock. In such event, do not operate the
product. Contact the manufacturer for support.
19. Clean dust off the power plug, periodically, to keep it clean and dry, ensuring proper and safe
operation of the product.
20. Do NOT destroy, process, or place the product close to any heating device; do NOT bend or twist
power cords, power plugs, cables, or wires with excessive force; do NOT place any heavy object
on the product as all of the above may cause damages to the product and result in fi re or electric
shock.
21. Do NOT touch power plugs with wet hands.
22. Always make sure to plug in the power plug fi rmly and completely. Incompletely placed power
plugs may cause fi re or electric shock due to built up heat emission.
23. Do NOT use any non-rated power sockets or power strips with many other devices jointly plugged
in. The wire of non-designated capacity may cause fi re due to built up heat emission. Try to use a
single, directly dedicated and rated GFI power socket for the product for safe operation.
24. In case of product malfunction or unusual events such as electrical burning smell, smoke, or loss
of content signals on TV/Display due to internal overheating, immediately turn off and unplug the
power and contact the manufacturer.
25. Do NOT install the product at such unstable locations as moving objects, constantly vibrating
props, or uneven surfaces. Improper installation may cause products to fall off. Follow mounting
instructions properly for safe operation of the product.
26. Do NOT install the product near any poisonous gas or chemically unstable atmosphere as it may
cause fi re.
27. Do NOT install the product near any strong magnetic or electrical current fi eld. It may cause
fi re, electric shock, or severe damages to the product. The product may be subject to any
electromagnetic radiation, causing deterioration of content picture quality.
28. Do NOT leave any fi re source such as candles close to or on the product as it may be a cause for
fi re or damages to the product.
29. Do NOT move or transport the product with any cables (power cables, content connectivity
cables) plugged in to the source devices. Damages may occur to the cables, plugs, or jointing
connectors of the cables due to forcible bending and stress, which may cause damages to the
waterproof seal of the product, making it subject to fi re, electric shock, or shorted circuit.
30. When unplugging, always grab the plugs of power cords or cables. Improper pulling of the cords
or cables may cause damages to the waterproof seal of the product, making it subject to fi re,
electric shock, or shorted circuit.
31. Do NOT climb on the product.
32. Two persons or more shall transport the product.
33. Do NOT use any other power cords or connection cables than what is provided with the product
or from the manufacturer directly. Use of untested, unauthorized, or substituted power cords or
connection cables may be a cause for malfunction, fi re, electric shock, or severe damages to the
product. Also such use of improper or undesignated power cords or connection cables will void
product warranty.
34. Always leave the Power Off when plugging or unplugging the power cords or connection cables to
avoid electric shock or damages to the product.
35. Do NOT use any chemical such as paint thinner or benzene to clean the product's exterior. It may
cause scratches on the surface, erasing proper indications, identifi cation labels, or instructions on
the exterior, which may be a cause for misuse and improper operation of the product.
4
2014-06-13
#:220-9002-5 2015-02-24

Advertisement

Table of Contents
loading

Table of Contents