Tips; Troubleshooting; Care Of The Screen; Mobile Telephone Warning - peerless-AV CL-42PLC68-OB User Manual

Outdoor hd display
Hide thumbs Also See for CL-42PLC68-OB:
Table of Contents

Advertisement

Troubleshooting

No Picture • Check that the display is turned on.
Remote Control
Doesn't Work
Picture Appears
Slowly After
Switching On

Care Of The Screen

Do not rub or strike the screen with anything hard as this may scratch, mar, or even damage the
screen permanently .
Never use ammonia or any cleaner containing ammonia, as it will damage the anti-glare coating on
the screen. Only use Isopropyl alcohol or an approved screen cleaner to clean the screen.
Protective covers are available for Peerless-AV all-weather TVs. Contact your Peerless-AV
representative to get the right cover for your screen.
Unplug the power cord before cleaning the screen Dust the display by wiping the screen and the
cabinet with a soft, clean cloth If the screen requires additional cleaning, use a clean, damp cloth Do
not use liquid cleaners, aerosol cleaners, or solvents of any kind.

Mobile Telephone Warning

Keep your mobile telephone away from your display to avoid disturbances in the picture or sound,
possibly causing permanent damage to your display.

End Of Life Directives

In an effort to produce environmentally friendly products. your new display contains materials that can
be recycled and reused. At the end of your display life, specialized companies can minimize display
waste by separating reusable materials from non-reusable materials. Please ensure you dispose of
your display according to local regulations.
License Agreement And Trademark Notice
• Is the power cord inserted into a power outlet?
• Test the power outlet by plugging in another device into the outlet.
• Make sure there is a direct path between the remote control and the IR
receiver located at the top right of the display.
• Was the shipping tab removed and the battery re-installed correctly?
• Install new battery.
• This is normal; the display image is disabled during the start up process.
• After an image appears it can take several minutes for the LCD display to
reach it's normal operating brightness.
• On fi rst use activate power control by pressing power button on remote.
HDMI, the HDMI logo and High-Defi nition Multimedia Interface are
®
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Manufactured under license from Dolby Laboratories Dolby and the
double-D symbol are trademarks of Dolby Laboratories

TIPS

15
2014-06-13
#:220-9002-5 2015-02-24

Advertisement

Table of Contents
loading

Table of Contents