Samsung SyncMaster 2043SW User Manual page 37

4.
5.
6.
7.
8.
9.
10. Select "Show all devices" and choose the monitor that corresponds to the one you con-
11. Continue choosing "Close" button and "OK" button until you close the Display Properties
Microsoft
1.
2.
3.
4.
If there is no Mode at All Display Modes, select the level of resolution and vertical frequency
by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting
file.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Downloaded from ManualMonitor.com Manuals
Select the "Monitor" tab.
Click the "Change" button in the "Monitor Type" area.
Choose "Specify the location of the driver".
Choose "Display a list of all the driver in a specific location..." then click "Next" button.
Click the "Have Disk" button.
Specify A:\(D:\driver) then click "OK" button.
nected to your computer and click "OK".
dialogue box.
® ®
Windows NT Operating System
Click "Start", "Settings", "Control Panel", and then double-click "Display" icon.
In Display Registration Information window, click Settings Tab and then click "All Display
Modes".
Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click "OK".
Click "Apply" button if you see the screen working normally after clicking "Test". If the
screen is not normal, change to a different mode (lower mode of resolution, colors or
frequency).
Note
Press "Enter" at the first and the second screen after executing the X86Config file.
The third screen is for setting your mouse.
Set a mouse for your computer.
The next screen is for selecting a keyboard.
Set a Keyboard for your computer.
The next screen is for setting your monitor.
First of all, set a horizontal frequency for your monitor. (You can enter the frequency
directly.)
Set a vertical frequency for your monitor. (You can enter the frequency directly.)
Enter the model name of your monitor. This information will not affect the actual execution
of X-Window.
Using the Software
36