Samsung SyncMaster 2043SW User Manual page 124

The screen shows strange colors or just black and white.
Q:
A:
A:
Q:
A:
Q:
A:
The screen suddenly has become unbalanced.
Q:
A:
Q:
A:
Q:
The screen is out of focus or OSD cannot be adjusted.
Q:
A:
LED is blinking but no images on the screen.
Q:
A:
There are only 16 colors shown on the screen. The screen colors have changed after
changing the video card.
Q:
A:
A:
Downloaded from ManualMonitor.com Manuals
Is the screen displaying only one color as if looking at the screen through a cellophane
paper?
Check the signal cable connection.
Make sure the video card is fully inserted in its slot.
Have the screen colors become strange after running a program or due to a crash
between applications?
Reboot the computer.
Has the video card been set properly?
Set the video card by referring to the video card manual.
Have you changed the video card or the driver?
Adjust screen image position and size using the OSD.
Have you adjusted the resolution or frequency to the monitor?
Adjust the resolution and frequency at the video card.
(Refer to the Preset Timing Modes).
The screen can be unbalanced due to the cycle of the video card signals. Readjust
Position by referring to the OSD.
Have you adjusted the resolution or frequency on the monitor?
Adjust the resolution and frequency of the video card.
(Refer to the Preset Timing Modes).
Is the frequency properly adjusted when checking the Display Timing on the menu?
Adjust the frequency properly by referring to the video card manual and the Preset
Timing Modes.
(The maximum frequency per resolution may differ from product to product.)
Have the Windows colors been set properly?
Windows XP :
Set the resolution at the Control Panel → Appearance and Themes → Display → Set-
tings.
Windows ME/2000 :
Troubleshooting
123