Samsung SyncMaster 2043SW User Manual page 118

A:
A:
A:
Q:
A:
I cannot see the On Screen Display.
Q:
A:
The screen shows strange colors or just black and white.
Q:
A:
A:
Q:
A:
Q:
A:
The screen suddenly has become unbalanced.
Q:
A:
Q:
A:
Q:
The screen is out of focus or OSD cannot be adjusted.
Q:
A:
Downloaded from ManualMonitor.com Manuals
The monitor is in PowerSaver mode.
Press a key on the keyboard to activate the monitor and restore the image on the screen.
If there is still no image, press the '
keyboard again to activate the monitor and restore the image on the screen.
Connected using the DVI cable?
You may get a blank screen if you boot the system before you connect the DVI cable,
or disconnect and then reconnect the DVI cable while the system is running as certain
types of graphic cards do not send out video signals. Connect the DVI cable and then
reboot the system.
Have you locked the On Screen Display (OSD) Menu to prevent changes?
Unlock the OSD by pressing the [MENU/
Is the screen displaying only one color as if looking at the screen through a cellophane
paper?
Check the signal cable connection.
Make sure the video card is fully inserted in its slot.
Have the screen colors become strange after running a program or due to a crash
between applications?
Reboot the computer.
Has the video card been set properly?
Set the video card by referring to the video card manual.
Have you changed the video card or the driver?
Adjust screen image position and size using the OSD.
Have you adjusted the resolution or frequency to the monitor?
Adjust the resolution and frequency at the video card.
(Refer to the Preset Timing Modes).
The screen can be unbalanced due to the cycle of the video card signals. Readjust
Position by referring to the OSD.
Have you adjusted the resolution or frequency on the monitor?
Adjust the resolution and frequency of the video card.
(Refer to the Preset Timing Modes).
Troubleshooting
/SOURCE' button. Then press any key on the
] button for at least 5 seconds.
117