There Are Only 16 Colors Shown On The Screen. The Screen Colors Have Changed After Changing The Video Card; Check When Magictune™ Does Not Function Properly - Samsung SyncMaster 2043SW User Manual

Q:
A:
Q:
The screen is out of focus or OSD cannot be adjusted.
Q:
A:
LED is blinking but no images on the screen.
Q:
A:
There are only 16 colors shown on the screen. The screen colors have changed after
changing the video card.
Q:
A:
A:
Q:
A:
There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) mon-
itor found".
Q:
A:
Q:
A:
Check when MagicTune™ does not function properly.
Q:
Downloaded from ManualMonitor.com Manuals
Have you adjusted the resolution or frequency to the monitor?
Adjust the resolution and frequency at the video card.
(Refer to the Preset Timing Modes).
The screen can be unbalanced due to the cycle of the video card signals. Readjust
Position by referring to the OSD.
Have you adjusted the resolution or frequency on the monitor?
Adjust the resolution and frequency of the video card.
(Refer to the Preset Timing Modes).
Is the frequency properly adjusted when checking the Display Timing on the menu?
Adjust the frequency properly by referring to the video card manual and the Preset
Timing Modes.
(The maximum frequency per resolution may differ from product to product.)
Have the Windows colors been set properly?
Windows XP :
Set the resolution at the Control Panel → Appearance and Themes → Display → Set-
tings.
Windows ME/2000 :
Set the resolution at the Control Panel → Display → Settings.
Has the video card been set properly?
Set the video card by referring to the video card manual.
Have you installed the monitor driver?
Install the monitor driver according to the Monitor Driver.
See the video card manual to see if the Plug & Play (VESA DDC) function can be
supported.
Install the monitor driver according to the Monitor Driver.
MagicTune™ feature is found only on PC (VGA) with Window OS that supports Plug
and Play.
Troubleshooting
112