Torque Specification; Specific Torque - Jacobsen R-311T Parts & Maintenance Manual

3.17 TORQUE SPECIFICATION ___________________________________________________________________

All torque values included in these charts are approximate and are for reference only. Use of these torque values is at your sole risk.
Jacobsen is not responsible for any loss, claim, or damage arising from the use of these charts. Extreme caution should always be used
Jacobsen uses Grade 5 Plated bolts as standard unless otherwise noted. For tightening plated bolts use the value given for lubricated.
SIZE UNITS
Lubricated
#6-32 in-lb (Nm) –
#8-32 in-lb (Nm) –
#10-24 in-lb (Nm) –
#10-32 in-lb (Nm) –
#12-24 in-lb (Nm) –
1/4-20 in-lb (Nm) 75 (8.4)
1/4-28 in-lb (Nm) 85 (9.6)
5/16-18 in-lb (Nm) 157 (17.7)
5/16-24 in-lb (Nm) 173 (19.5)
3/8-16 ft-lb (Nm) 23 (31.1)
3/8-24 ft-lb (Nm) 26 (35.2)
SIZE UNITS
Lubricated
M4 Nm (in-lb) –
M5 Nm (in-lb) 1.80 (16)
M6
Nm (in-lb) 3.05 (27)
M8 Nm (in-lb) 7.41 (65)
M10 Nm (ft-lb) 14.7 (11)
M12
Nm (ft-lb) 25.6 (19)
M14 Nm (ft-lb) 40.8 (30)

3.18 SPECIFIC TORQUE ________________________________________________________________________

Tie Rod Ball Joints (2): 30 ft lb. (40 Nm).
Steering Cylinder Ball Joints (2): 40 ft lb (54 Nm).
Blade Adapter Bolts (14): 35 - 40 ft lb (47 - 54 Nm).
Center Blade Bolts (7): 67-83 ft lb (91-112 Nm).
Rear Wheel Bolts (10): 40 - 50 ft lb (54 - 68 Nm).
when using any torque value.
AMERICAN NATIONAL STANDARD FASTENERS
GRADE 5 GRADE 8
Dry Lubricated
20 (2.3) –
24 (2.7) –
35 (4.0) –
40 (4.5) –
50 (5.7) –
100 (11.3) 107 (12.1)
115 (13.0) 120 (13.5)
210 (23.7) 220 (24.8)
230 (26.0) 245 (27.6)
31 (42.0) 32 (43.3)
35 (47.4) 37 (50.1)
4.6 8.8
Dry Lubricated
– –
2.40 (21) 4.63 (41)
4.07 (36) 7.87 (69)
9.98 (88) 19.1 (69)
19.6 (14) 37.8 (29)
34.1 (25) 66.0 (48)
54.3 (40) 105 (77)
NOTICE
SIZE UNITS
Dry
– 7/16-14 ft-lb (Nm)
30 (3.4) 7/16-20 ft-lb (Nm)
45 (5.1) 1/2-13 ft-lb (Nm)
50 (5.7) 1/2-20 ft-lb (Nm)
65 (7.3) 9/16-12 ft-lb (Nm)
143 (16.1) 9/16-18 ft-lb (Nm)
163 (18.4) 5/8-11 ft-lb (Nm)
305 (34.4) 5/8-18 ft-lb (Nm)
325 (36.7) 3/4-10 ft-lb (Nm)
44 (59.6) 3/4-16 ft-lb (Nm)
50 (67.8) 7/8-14 ft-lb (Nm)
METRIC FASTENERS
10.9
Dry Lubricated
– –
6.18 (54) 6.63 (59)
10.5 (93) 11.3 (102)
25.5 (226) 27.3 (241)
50.5 (37) 54.1 (40)
88.0 (65) 94.5 (70)
140 (103) 150 (110)
Front Wheel Bolts (10): 85-95 ft lb (115 - 129 Nm)
ADJUSTMENTS 3
GRADE 5
Lubricated Dry
37 (50.1) 50 (67.8)
42 (56.9) 55 (74.6)
57 (77.2) 75 (101)
64 (86.7) 85 (115)
82 (111) 109 (148)
92 (124) 122 (165)
113 (153) 151 (204)
128 (173) 170 (230)
200 (271) 266 (360)
223 (302) 298 404
355 (481) 473 (641)
12.9
Dry Lubricated Dry
– 3.83 (34) 5.11 (45)
8.84 (78) 7.75 (68) 10.3 (910
15.0 (133) 13.2 (117) 17.6 (156)
36.5 (323) 32.0 (283) 42.6 (377)
72.2 (53) 63.3 (46) 84.4 (62)
125 (92) 110 (81) 147 (108)
200 (147) 175 (129) 234 (172)
GRADE 8
Lubricated Dry
53 (71.8) 70 (94.9)
59 (80.0) 78 (105)
80 (108) 107 (145)
90 (122) 120 (162)
115 (156) 154 (209)
129 (174) 172 (233)
159 (215) 211 (286)
180 (244) 240 (325)
282 (382) 376 (509)
315 (427) 420 (569)
500 (678) 668 (905)
Non Critical
Fasteners into
Aluminum
2.0 (18)
4.0 (35)
6.8 (60)
17.0 (150)
33.9 (25)
61.0 (45)
94.9 (70)
15