Jeep 2009 Wrangler Owner's Manual page 31

2. Unplug the wiring harness connector under instru-
ment panel by pressing the tab at the side of the
connector and pulling to disconnect.
NOTE: If the red latch on the connector is locked, push
the red latch to the right until you can only see the latch
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29
on one end (right) of the connector. This will unlock the
connector tab, allowing the tab to be pressed down and
enabling the harness to be disconnected.
1 — Harness Connector
2 — Body Hook
3 — Door/Harness Strap
2