Display Of Last Result - Lifescan SureStep Owner's Booklet

Setting the Day.
Press and release the green C button
until the correct day appears. To
move faster, hold the green C button
down. With the correct day on the
display, press the blue power button
and the display of last result setting
will appear.

Display of Last Result

The SureStep Meter is pre-set to
®
display your last test result automat-
ically when you turn on the meter.
If you wish to turn off the automatic
display of your last result, press
the green C button. This symbol
will flash,
indicating that the automatic
display is turned off. Then, press
the blue power button to move
to the unit of measurement setting.
58