Yamaha 2006 YSF-R1(V) Supplementary Service Manual page 26

Heat protector
Main switch lead
Left handlebar switch lead
Immobilizer lead
EXUP servo motor lead
Coolant reservoir tank drain hose
Fuel tank drain hose
Coolant outlet pipe
Sidestand switch lead
Oil level switch lead
A.C.magneto lead
Fuse box stay
Water hose
Stay 1
Chain case cover
CABLE ROUTING
Clamp the leads so that they
are positioned inner of the vehi-
cle than the washer position
after routing them between the
frame and radiator stay. Align
the clamp position with the tap-
ing sections of leads. Point the
tip of the clamp (excessive part)
to the down front side of the
vehicle.
What the clamp fastens at this
stage are the handlebar switch,
main switch and immobilizer
leads.
18
SPEC
Pass the main switch lead, left
handlebar switch lead
immobilizer lead between the
frame and the heat protector.
To the coolant reservoir tank
Fold back the clamp and secure
it after passing the lead through
the clamp.
To the EXUP servo motor
and