Advertisement
ASSEMBLY STEP 7
CONSOLE
CONSOLE WIRES
PRE-ATTACHED
SCREWS
CONSOLE MAST
NOTE:There is NO hardware bag for
this step. All hardware is pre-installed.
A) Attach the CONSOLEWIRES.
B) Carefully tuck the CONSOLEMAST
wires into the CONSOLEMASTbefore
attaching the CONSOLE.
C) Attach CONSOLE to the CONSOLE
MAST using the 4PRE-ATTACHED
SCREWS (screws will have to be
removed from the console first).
DO NOT PINCH WIRES!
7
ASSEMBLY STEP 8
CONSOLE MAST
PRE-ATTACHED
SCREWS
BOTTLE HOLDER
AC ADAPTOR INPUT
YO U'RE FINI SHED!
8
A) Attach BOTTLE HOLDER to the
CONSOLE MAST using the 2PRE-
ATTACHED SCREWS (screws will
have to be removed from the console
mast first).Connect AC ADAPTOR to
the AC ADAPTOR INPUT, located at
front of the main frame.
Connect ADAPTORto a power outlet.
Locate the ON / OFFswitch on the back
of the CONSOLE.Flip the switch to
the ON position. After a "beep", the
CONSOLE will light up.
Advertisement
