I Have Forgotten The Administrator Password; Camera Can Not Record; Subnet Doesn't Match - INSTEON 2864-222 User Manual

Reboot the browser and relogin the camera, you will see the surveillance window.

6.1.4 I have forgotten the administrator password

To reset the administrator username and password, press and hold down the RESET BUTTON for 5 seconds.
Upon releasing the reset button, wait for 20 seconds, the camera will reboot and the username and password
will return to the factory default administrator username and password. Please power on the camera before
reset
Default administrator username: admin
Default administrator password: No password
6.1.5 Camera can not record in Internet Exploer
Camera can not record when I click Record button or I can't change the manually record path.
When you use Windows7 or Vista, you may be not able to do manually record or change the record path
because of the security settings of computer.
There are two ways to resolve this problem:
(1) Please add the camera as a trusted site to resolve this issue. The steps are
IE browserToolInternet PropertiesSecurityTrusted sitesSitesAdd
(2) Open IE browser, then right click, select "Run as administrator"

6.1.6 Subnet doesn't match

Check whether your ipcamera in the same subnet of your computer. The step is Control PanelNetwork
ConnectionsDbclick Local Area Connections  Choose GeneralProperties.(Figure 3.23/3.24)
Click Add button to install
the plugin
Figure 6.5
Check
83
83