Table of Contents
Advertisement
default factory settings before using the camera.
4.9.3 Patch Installation
Click "Browse" to select the correct patch file, and then click "Install Patch" to install the patch. Do not turn off
the power during it installing. After installing is complete, you will receive a system prompt.
4.9.4 Factory Reset
Select Factory Reset and all parameters will return to factory settings if selected. This is similar to press the
Reset button on the bottom of the camera.
4.9.5 Reboot
Click Reboot System to reboot the camera. This is similar to unplugging the power to the camera.
Figure 4.70
Figure 4.71
77
77
Hide quick links:
Advertisement
Table of Contents
