Start-Up Options; Firewall - INSTEON 2864-222 User Manual

Add: Select one preset points and add it to the selected cruise track.
Delete: Select one preset points you have added to one cruise track, click delete.
Move up/ down: Select one cruise track, adjust the order of preset points in one cruise track.
Attention: TO prevent overheating of the motor, a long patrol time is not advised.

4.7.3 Start-Up Options

This section will allow you to set the stop position after the camera reboots.
It supports three modes: Disable Start-Up, Go To Home Position and Go To Preset Position.
Disable Start-Up: When rebooting, the camera will not pan / tilt.
Go To Home Position: When rebooting, the camera will pa Providing Central Management Software to
manage or monitor multi-cameras n / tilt and stops at center.
Go To Preset Position: Select one preset position and save it. When rebooting, the camera will pan/ tilt and
stops at the preset position you have set.
Figure 4.64

4.8 Firewall

This section explains how to control the access permission by checking the client PC's IP addresses. It is
composed of the following columns: Block access from these IP addresses and Only allow access from
these IP addresses.
73
73