Upnp - INSTEON 2864-222 User Manual

Port forwarding within the router
Example: The camera's LAN IP address is
Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or named Virtue
Server on some brands of router). Take Linksys brand router as an example, Login the router, and goes
to Applications & Gaming->Single Port Forwarding.
Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera within the router showed
as below.
Fill the Media Port no. of the
Assign a name
camera on the column of
as you like here
External Port and Internal Port
③ Use domain name to access the camera via internet
After the port forwarding is finished, you can use the domain name+ http no. to access the camera via
internet. Take hostname ycxgwp.no-ip.info and http no. 2000 for example, the accessing link of the camera
via internet would be http:// ycxgwp.no-ip.info:2000

4.3.5 UPnP

The default UPnP status is closed. You can enable UPnP, then the camera's software will be configured for
port forwarding. Back to the "Device Status" panel, you can see the UPnP status:
http://192.168.8.100:2000
Figure 4.26
Figure 4.27
, Media port no. is 9200.
52
52