Record; Storage Location - INSTEON 2864-222 User Manual

③ Press the left mouse and drag it on the time boxes, you can select the serial area.
Step 07: Click Save button to take effect.
When the motion has been detected during the detection time in the detection area, the camera will alarm and
adopt the corresponding alarm indicators.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and
anytime.

4.6 Record

This section will allow you to change the record files storage path and the record time.

4.6.1 Storage Location

On this page you can change the alarm and manually recording storage path.
Figure 4.49
Figure 4.50
65
65