Pioneer AVIC-X9310BT Operation Manual page 407

Appendix
Messages and how to react to them
The following messages may be displayed by your navigation system. Refer to the table below to
identify the problem, then take the suggested corrective action.
There are occasions when you may see error messages other than those shown here. In such a
case, follow the instructions given on the display.
Messages in the procedures for updating
Message
An error occurred and the up-
date failed.
Messages for navigation functions
Message
Preparing to start up system...
please wait.
Dataloading failed.
Application startup failed.
Check file on SD card. Press
"OK" to exit Application
Mode.
Messages for audio functions
= For details, refer to Operation Manual for AVIC-U310BT.
When
Unexpected error occurred in the
update process.
When
When the navigation system starts,
the message is displayed if the re-
maining battery power of the de-
tachable device is low.
You may have transferred the data
from your cellular phone in a format
cannot be received by the naviga-
tion system.
The application is not stored on the
SD memory card.
The application failed to download
properly.
A file required for application start-
up is not stored on the SD memory
card or is damaged.
The SD memory card is damaged.
What to do
Consult your local Pioneer dealer if this mes-
sage persist.
What to do (Reference)
! Wait until the message "Ready to start up
system." appears. After the message is dis-
played, the navigation system restarts.
! Consult the nearest authorized Pioneer ser-
vice station if this message persists.
! Select a suitable item and format, then
retry. (Page 72)
! Connect your cellular phone with another
method again and retry. (Page 59)
Use the utility program AVIC FEEDS to con-
firm the proper solution.
Use the utility program AVIC FEEDS to con-
firm the proper solution.
Use the utility program AVIC FEEDS to con-
firm the proper solution.
Make sure there are no problems with the SD
memory card.
Appendix
139
En