When Connecting A Rear View Camera - Pioneer AVIC-X9310BT Operation Manual

Section
liD
(Connecting the system
)
~
RCA cable
U~~~~~J
To video output
Brown
20 cm (7-7/8 in.)
ill
~CACO"~
Power cord
The navigation unit
r----
VioleVwhite
~ (REVERSE GEAR SIGNAL INPUl1
For more detai Is about the wiri ng, refer to Connecting
the power cord
(2)
on page 12.
When this product is used with a rear view
camera, it is possible to automatically switch
from the video to rear view image when the
gear shift is moved to
REVERSE
(R). Rear
View
mode also allows you to check what is
behind you while driving.
When connecting a rear
view camera
6WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR
IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
6
CAUTION
• The screen image may appear reversed.
• The rear view camera is used as an aid to
keep an eye on trailers, or backing into a tight
parki ng spot. Do not use th is fu nction for en-
tertai nment pu rposes.
• Objects in rear view may appear closer or
more distant than in reality.
• Please note that the image area shown by the
rear view camera may differ slightly when full-
screen images are displayed when backing
and when checking the rear of the vehicle
while moving forward.
a
Notes
• This mode is available when the rear view
camera setting is set to "On". (For details,
refer to Operation Manual.)
• Connect the navigation system to the rear
view camera only. Do not connect to any
other equipment.
®
En