Connecting The Power Cord - Pioneer AVIC-X9310BT Operation Manual

Section
liD
~onnecting
the system
Connecting the power cord (1)
Yellow
To terminal supplied with power regardless of
ignition switch position.
Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Orange/white
To lighting sWitch terminal.
Black (ground)
To vehicle (metal) body.
• Note
When a subwoofer is connected to this navigation
system instead of a rear speaker, change the rear
output setting in the initial setting. (Refer to
Operation Manual.) The subwoofer output of this
navigation system is monaural.
r-------------------
White
~ +
Front speaker
8
With a two-speaker system, do not connect anything
to the speaker leads that are not connected to
speakers.
--------------------
Gray
~ +
Front speaker
8
)
When using a subwoofer of 70 W (2 0), be sure to connect with violet and violet/black leads of this
navigation system. Do not connect anything with green and green/black leads.
En