Tuning In Strong Signals; Switches The Seek Mode; Switching The Reception Mode - Pioneer AVIC-X9310BT Operation Manual

Chapter
17 HD Radio

Tuning in strong signals

Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
Display the "Function Menu" screen.
1
= For details of the operation, refer to Display-
ing the "Function Menu" screen on page
81.
2 Turn MULTI-CONTROL to display
"Local".
3 Pressing the center of MULTI-CONTROL
switches between on and off.
4 Press MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
! FM: Level 1 — Level 2 — Level 3 —
Level 4
! AM: Level 1 — Level 2
p The FM "4" (AM "2") setting allows recep-
tion of only the strongest stations, while
lower settings let you receive weaker
stations.

Switches the seek mode

You can select the method of seek tuning.
Display the "Function Menu" screen.
1
= For details of the operation, refer to Display-
ing the "Function Menu" screen on page
81.
2 Turn MULTI-CONTROL to display
"Seek Mode".
3 Press the center of MULTI-CONTROL to
switch between "Seek All" and "Seek HD".
! Seek All:
Seeks stations from both analog and digital
broadcasting.
! Seek HD:
Seeks from digital broadcasting only.
p If you select "Seek HD" on this setting
while "Blending" is set to "Off", the setting
86
En
™
reception
on "Blending" turns to "On" auto-
matically.

Switching the reception mode

If a digital broadcast reception condition gets
poor, the tuner automatically switches to the
analog broadcast of the same frequency level
in default. If you want to prevent a frequent
automatic switching, switch this setting to
"Off".
Display the "Function Menu" screen.
1
= For details of the operation, refer to Display-
ing the "Function Menu" screen on page
81.
2 Turn MULTI-CONTROL to display
"Blending".
3 Press the center of MULTI-CONTROL to
switch between "On" and "Off".
! Off:
Receives analog broadcasting only.
! On:
Automatically switches to the analog broad-
cast of the same frequency level as the digi-
tal broadcast.
is displayed while "Blending" is set to
"On".
p If you select "Off" on this setting while
"Seek Mode" is set to "Seek HD", the set-
ting on "Seek Mode" turns to "Seek All"
automatically.