Table of Contents
Advertisement
f.
MEMS board
g.
hard drive
h.
card bracket
3.
Disconnect the battery cable from the battery board.
4.
To remove the battery board:
a. Remove the screws that secure the battery board [1]
b. Disconnect the battery board from the connector [2].
c. Lift the battery board away from the computer [3].
Installing the Battery Board
1.
Slide the battery board to its connector.
2.
Tighten the screws to secure the battery board.
3.
Connect the battery cable to the battery board.
4.
Install:
a.
card bracket
b.
hard drive
c.
MEMS board
d.
USH board
e.
GPS module
f.
docking board
g.
bottom cover
h.
battery
5.
Follow the procedures in
Removing the Keyboard Control Board
1.
Follow the procedures in
2.
Remove:
a.
battery
b.
bottom cover
c.
docking board
d.
GPS module
e.
USH board
After Working Inside Your
Before Working Inside Your Computer
computer.
31
Advertisement
Table of Contents
