Installing The Memory Module; Removing The Mems Board - Dell Latitude 12 Rugged Extreme - 7204 Owner's Manual

Installing the Memory Module

1. Insert the memory module into the memory socket.
2. Press the memory module down until it clicks into place.
3. Install:
a. bottom cover
b. battery
4. Follow the procedures in

Removing the MEMS Board

MEMS board is also known as the sensor board.
1. Follow the procedures in
2. Remove:
a. battery
b. bottom cover
3. To remove the MEMS board:
a. Disconnect the cable connected to the MEMS board [1,2].
b. Remove the screws that secure the MEMS board to the computer chassis [3].
c. Lift the MEMS board from the computer chassis [4].
14
After Working Inside Your
Before Working Inside Your
computer.
Computer.