Loading The Paper - Star SP712 SERIES Hardware Manual

5-2. Loading the paper

1 Open the printer cover by sliding the latch toward
you.
Important!
1. Do not touch the print head immediately after
printing as it can be extremely hot.
2. Do not touch the cutter blade.
· There is a cutter inside the paper outlet slot.
Not only should you not put your hand in the
paper outlet slot while printing is in progress,
never put your hand into the outlet even when
printing is not in progress.
2 While observing the direction of the roll, set the
paper roll into the hollow, and pull on the leading
edge of the paper toward you.
3 Push down both sides of the printer cover to
close.
Note: Make sure that the printer cover is securely
closed.
– 16 –