Cleaning
1. Pull out the fixing clamp at two sides,
remove the main body, and pull out the
motor inlet filter.
2. Take out the bugle shape cover, grid &
syphon(or SMS dust filter), clean Swash
them. Pour out the dirty water/dust, and
wash the dust barrel and it's components.
3. Pull out the outlet plate, wash & clean the
outlet filters.
4. Wash all the dirty parts you think
necessary(brush, tube, hose, etc)too.
5. After all the washed parts are dry, re-
assemble all the parts correctly for next use.
Storage
7
When vacuum cleaner is not in use, store
attachments as shown in fig.
6 l
EN
Main body
Motor inlet filter
Sealing ring
Bugle shape cover
Grid
Syphon
Fixing clamp