Pittasoft BLACKVUE LCD User Manual page 7

Caution
Injury or property damage can be caused for users if the following directions are not followed:
y Do not spray a detergent directly onto the exterior of this product.
It can discolor or have a crack. Also, the product can have an error.
y If the product is used outside the optimal temperature range (0oC ~ 60oC),
performance can degrade or malfunction can be caused.
y Check if this product has been properly installed.
The product can have malfunction by being dropped due to vibration, or you can be
injured.
y While entering or exiting a tunnel, at a daytime in the face of bright
sunlight, or at dark night with no light, the quality of a recorded video can
deteriorate.
y If the product is damaged or the power supply is cut due to an accident, a
video may not be recorded.
y Excessively tinted windshield glass can distort the recorded video or cause
it to be indistinct.
y Prolonged use of the product can increase the interior temperature and
cause burns.
y Since microSD cards are consumables, replace them with new ones after
prolonged use.
If a microSD card is used for a long period of time, a video may not be properly
recorded. Thus, check regularly if recording is being properly done. If not, replace
the card with a new one.
y Clean the lens on a regular basis.
If the lens is not clean, it may affect recording.
y While data are being saved into the microSD card or the card is reading
data, do not detach the card.
The data may be damaged or malfunction caused.
y It is recommended to install this product at the installation spot. The
installation spot can be checked from the website of BlackVue (www.
blackvue.com).
y When this product does not need to be used for a long period of time, it is
recommended to detach the power cord.
y Do not press the LCD screen with a sharp or pointed object.
y Do not press the LCD screen too firmly.
y Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
BLACKVUE LCD I 7