Pittasoft BLACKVUE LCD User Manual page 41

1
2
No. Function
It is possible to set the G-sensor sensitivity for event
Sensitivity for recording when shock is applied. The G-sensor
1
Normal Recording sensitivity of top and bottom, left and right, front
and rear each can be set from 0-10 levels.
3
Description
No. Function
It is possible to set the G-sensor and motion
detection sensitivity to start event recording
during parking recording mode. The G-sensor
Sensitivity for
sensitivity of top and bottom, left and right, front
2
Parking Mode
and rear each can be set from 0-10 levels; and the
motion detection sensitivity can be set from 0-5
levels.
When the vehicle speed exceeds the set level, a
beep of event recording is created and switches to
Speed Alert
3
event recording mode. You can enter the number
of speed limit that triggers the speed warning.
Note
y In normal recording mode, 0 level indicates the minimum of impact
sensitivity.
y In parking recording mode, 0 level of motion detection sensitivity
indicates that motion recognition is off.
Description
BLACKVUE LCD I 41