> Contents Introduction to the Manual Shooting Turning on the Power Automatic Video Recording Safety Precautions Using the BLACKVUE Getting Started Checking the Components SPORT APP Screen View Understanding the Part Name Changing the Setting Option and Function Playing Movies/Photos Inserting/Removing the Memory Card Moving files...
BlackVue is the registered trademark of Pitta Soft Co., Warranty and Support Ltd. PittaSoft Co., Ltd. reserves the rights regarding all works related to the BlackVue brand such as product design, trademarks, and product- y In accordance with Personal Information Security Law & related promotional videos.
> Safety Precautions The purpose of these cautions is to maintain user safety and avoid damage to property. Please make sure to read through this manual so as to use the product in the correct way. DANGER Death or property damage can be caused for users if the following directions are not followed: y Do not disassemble, repair, or modify the product yourself.
Page 6
WARNING Death or serious injury can be caused for users if the following directions are not followed: y Do not leave the product where infants, children, or pets can reach it. y Do not cover the product with any material. They might swallow small components, or their saliva could get into it It can cause external deformation of the product or fire.
Page 7
CAUTION Injury or property damage can be caused for users if the following directions are not followed: y Do not spray cleaning products directly onto the outside of the product. y When you connect the cable or insert the battery or memory card to the camera, be careful not to apply impact to the camera or connect It can cause discoloration, cracks, or malfunction.
> Getting Started I Checking the Components After purchasing the camera, open the box and check the following components. Battery Memory card Tape for mount Camera Waterproof power cable Cable clip User Manual...
Page 9
Accessories (Sold separately) LCD pack for bike Handlebar mount (LCD, Waterproof housing backdoor for LCD) Joint rubber for Waterproof housing Cable connector single cable Note y The image of each component or accessory may differ from the ac- tual component or accessory. y To enhance the performance of the product, the components of this product may be changed without prior notice.
I Understanding the Part Name and Function Check the name and function of each part first before using the camera. Shutter/Select button LED indicators Speaker Battery slot cover • VIDEO • PHOTO • HIGH SPEED • WiFi USB, HDMI output LCD connection Wi-Fi button terminal and...
Page 11
Item Description Item Description Shooting mode: Start/End shooting VIDEO Blue: Movie/Time Lapse mode Playback mode PHOTO Blue: Photo shooting mode • Thumbnail view: Select a file • Playback or Pause HIGH SPEED Blue: High speed shooting mode Setting mode : Select a menu or setting item Blue: Wi-Fi power on Wi-Fi Off: Wi-Fi power off...
I Inserting/Removing the Memory Card Close the cover of the memory Inserting the memory card card slot. Open the cover of the memory card slot. Note Be careful not to lose the cover for the memory card slot. Removing the memory card Insert the memory card with the Press the memory card in lightly, and metallic terminal to the left.
I Inserting/Removing the Battery Inserting the battery Close the battery cover. Open the battery cover. Removing the Battery Insert the batteries. Remove the battery by holding and lifting the plastic handle on the opposite side of the metallic terminal. BLACKVUE BIKE I SC300 13...
(not supplied) (Not supplied) Note Use only authentic, manufacturer-recommended, Lithium-ion replacement batteries or supplied battery charger. Otherwise, PittaSoft Co., Ltd. will not be held responsible for any problem. Charging by Connecting to the Power Adaptor Caution y RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Page 15
I Assembling the LCD (not supplied) You can check the shooting scene, play back a file, or set the camera and shooting environments by mounting the LCD component to the camera. Name of each part in the LCD Assembling the LCD Align the assembly groove on the LCD with the right end of the camera, and LCD power button insert the connection terminal of the LCD into the connection terminal of...
Page 16
Removing the LCD Remove the LCD by pulling the part marked with an arrow firmly upwards. Note After assembling the LCD, turn on the camera and check the LCD operates normally. If the LCD screen does not turn on, turn off the camera and assemble the LCD again using the method specified on the previous page.
> Installing Camera I Camera Installation Using a mount, you can install the camera on a bike. Camera Installation Using a Handle Bar Mount Installation Using an Adhesive Tape (not supplied) You can install the camera onto Attach the adhesive tape to the handle via a handle bar where you want to place the mount and affix the camera using...
I Installing the Camera inside a Waterproof Housing By placing the camera inside a waterproof housing, you can protect your camera from external hazards (dust and water). Camera installation method is the same as the slim-type backdoor and backdoor for LCD. Before placing the camera inside the waterproof housing, ensure that you have powered off the camera.
Connecting Camera and Cable I Connecting Power Cable Using the waterproof housing and waterproof power cable, you can draw power Turn connector screw clockwise and remove the S-washer and cable from the bike’s cigar jack when it rains. joint rubber. Cigar jack Insert the micro USB connector of Converter...
Page 20
Insert the S-washer with the narrow side facing upwards and turn Turn the extension cable screw of the cable connector joint screw waterproof housing clockwise and clockwise. remove the extension cable cover. Note Using a joint rubber for multi cable, you can connect both the HDMI cable (not supplied) and the power cable at the same time.
Page 21
Connecting Cable with Power Supply Note When you have no cigar jack power, cut the waterproof power cable and Firmly mount the waterproof housing that holds the camera onto connect it directly to the battery, make sure that you do not cut the middle of your bike.
Page 22
Removing Cable after Using the Camera When you are done with using the camera, detach periferals, and keep the camera, you do not need to remove all cables from you bike. Remove cables in a place free from water, sand, or dust. Disconnect the connector jacks of waterproof power cable.
> Shooting I Turning on the Power I Automatic Video Recording If you have ther camera connected to the bike power supply, you can record After charging the battery, press and hold down until the camera turns video during the entirel time you are biking. Up to full HD image resolution with 1920 x 1080 pixels at 30fps, video images are recorded in the MP4 format.
Page 24
> Using the BLACKVUE SPORT APP You can control or manage the camera from a wireless device (smartphone Touch the Wi-Fi button of BLACKVUE SPORT App. (Eg: SC300) Select or tablet PC) where the BLACKVUE SPORT App is installed. blackvue a list of devices to connect and enter as the password.
Page 25
Note y Wi-Fi SSID can be changed from the App Settings. y If you save the connection information when connecting using Wi- Fi, you can tap the Wi-Fi button in the BLACKVUE SPORT App to connect it without turning on the Wi-Fi function of the smartphone. (only for Android) blackvue y The initial password is...
I Screen View Descriptions Descriptions Shoots a movie or take a Moves to the Home screen. picture. Moves to the internal Watches the shooting memory. screen in real time. Displays the captured Moves to the list of movies/ screen in real time. pictures.
I Changing the Setting Option BlackVue Sport SETTINGS App Settings Camera Press ▶ ▶ Android Settings to access the setting screen. Select a desired setting menu, and select the setting to change. Save Press to save the setting. EXIT Press to return to the previous screen without saving the setting.
Page 28
Setting Option Mode Menu Setting Option Mode Menu Setting Option Resolution Always use BlackVue S player Image Quality App Settings Photo Settings Camera Burst Shot Settings Enable Wi-Fi Strength Monitor Self Timer Resolution/FPS Image Settings Rotation Video Quality Camera Video Settings Time Lapse Settings Recording Time...
Page 29
Mode Menu Setting Option Date/Time Wi-Fi Voice Record Volume Camera Other Settings Settings Automatic Recovery Auto Power Off Default Setting Format BLACKVUE BIKE I SC300 29...
I Playing Movies/Photos I Moving files BlackVue Sport LIST 100BVSCM BlackVue Sport LIST 100BVSCM Press Press ▶ ▶ ▶ ▶ Select a desired file, and press and hold down the file until the menu is displayed. Copy files to internal storage Press to move the selected file to the internal memory.
I Managing the internal memory Internal Memory Press Cancel : Returns to the previous screen. Copy : Copies the selected video/photo. Select a desired file, and press and hold down the file until the menu is displayed. : Cuts the selected video/photo. Rename : Renames the video/photo you have selected.
Detach the microSD card from the microSD card reader, and insert I Firmware Upgrade the microSD card into the camera. You can upgrade the firmware version by saving the firmware to a microSD card and connecting the microSD card into the PC. Access the BLACKVUE SPORT web site (www.blackvuesport.com) and download the firmware upgrade file.
> Product Specifications To enhance the performance of the product, the product specifications may be changed without prior notice. Model BLACKVUE BIKE Rechargeable 1050mAh Type Li-ion Polymer Battery Battery Pixel 3.5 Mega Pixel Charging Micro USB Angle of View Opposite Angle 138˚ Format Camera Weight...
Page 35
FCC Compliance Information (FCC ID: YCK-SC300) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Page 36
The term of this product warranty is 1 year from the purchase date. (Accessories such as Battery : 6 Months) We, PittaSoft Co., Ltd., provide the product warranty according to Consumer Dispute Settlement Regulations (drawn up by the Fair Trade Commission). ...
Page 37
Warranty Consumer Injury Within the Term Out of the Term For Defect Free Repair Repair If Paid Repair/ Repeated problem with the same defect (up to 3 times) Available Paid Product Exchange For performance Repeated trouble with different parts (up to 5 times) / functional For the loss of a product while in A/S problems under...
Page 40
Name Ι BLACKVUE BIKE Manufacturer Ι Pittasoft Co.,Ltd. / South Korea Address Ι (Gasan-dong, BYC HIGHCITY), A-7th floor, 131, Gasan digital 1-ro, Geumcheon-gu, Seoul, 153-718, Republic of Korea E-mail Ι sales@pittasoft.com Service Center Ι +82.2.6947.4670(ext.3) www.blackvuesport.com...
Need help?
Do you have a question about the BLACKVUE BIKE SC300 and is the answer not in the manual?
Questions and answers