Insert & Remove The Microsd Card - Pittasoft BLACKVUE LCD User Manual

Insert & Remove the microSD Card
1
Insert the microSD card into the microSD card slot, of the front camera, in
the direction as shown in the figure below:
2
In order to detach the microSD card, gently push the center of the microSD
card with your thumb and pull out the card. Make sure that the microSD
card does not spring out when detaching the card.
Caution
y Do not remove the microSD card while it is saving or reading data. This
may cause data damaged or malfunction.
y Copy important data to other storage medias. Pittasoft Co., Ltd. is not
accountable for data loss resulting from carelessness.
Note
y Insert or remove the microSD card only when the product is turned off.
y MicroSD cards are consumables. Replace them with new ones after
prolonged use.
BLACKVUE LCD I 15