Power Settings - Pittasoft BLACKVUE LCD User Manual

Item
In parking recording mode, the impact sensitivity and
motion detection sensitivity that switch to event re-
cording mode can be set. The impact sensitivity of top
Parking Mode
and bottom, left and right, front and rear each can be
set from 0-10 levels; and the motion detection sensitiv-
ity can be set from 0-5 levels.
Note
y In normal recording mode, 0 level indicates the minimum of impact
sensitivity.
y In parking recording mode, 0 level of motion detection sensitivity
indicates that motion recognition is off.
30
Description

Power Settings

When the Battery Discharge Prevention Device(ex. Power Magic Pro) is connected to
the vehicle battery, the battary save mode may prevent car battery drainage during
parking. Depending on the user setting, BlackVue may be automatically powered
off. The below menu is activated only when battary save mode is turned on.
Item
The minimum working volt can be set. When vehicle
is parked after engine turned off, the power automati-
Min. Working Volt
cally turns off when the car battery volt falls below the
minimum set level.
The maximum working time can be set. When vehicle
is parked after engine turned off, the power automati-
Max. Working Time
cally turns off after a set time. The time can be set at 3, 8,
12, 24 or 36 hours and the default setting is 24 hours.
Description