General Maintenance - Optal Clear 40 Installation & Operation Manual

40 series; 70 series; 80 series; 110 series; 120 series; 130 series; 150 series; 170 series; 200 series
Table of Contents

Advertisement

MAINTENANCE INSTRUCTIONS
General Maintenance Instructions
Ortal Factory Recommended Service, Service Instructions
These recommendations are for Standard Ortal Fireplace Products. Custom fireplace
may have different recommended service periods and activities.
Q. How often should service be performed?
A.
Factory recommendation: minimum service once a year (annual service).
The following conditions should have more frequent service:
Units installed in commercial/public spaces: Every 3 months(quarterly)
Units installed in climates near to the ocean, or similar circumstances more
likely to build up corrosion: Every 6 months (semi-annual)
Read checklist first before proceeding with the service. Make sure you have all the
materials you need:
Before You Begin
• Tools
o Glass Holders
o 10mm Ratchet Key
o Manometer(checking gas pressure)
o Razor blade
o Paper towel or soft cloth for cleaning glass
o Glass cleaner (i.e. CRL glass cleaner spray for ceramic glass)
o Flathead 3/32" screwdriver
• Materials
o Silicon, you should have more than you need
o Batteries, 4xAA and 1 x 9.6v
• Thermocouple
o For all commercial installations or any residential unit where the fireplace
is being operated on average of 10 hours or more per day, the
thermocouple should be replaced annually.
o For all other installations, thermocouple should be replaced once every
three years.
78

Advertisement

Table of Contents
loading

Table of Contents