Setup Mode - Panasonic KT4H User Manual

6.8 Setup mode

To enter the Setup mode, press
display mode.
To set or select each setting item, use
Setting item numbers such as [25], [26], etc. are the same as those on the "6.4 Operation flowchart" (p.12).
Character
Input type selection
[25]
• The input type can be selected from a choice of; thermocouple (10 types), RTD (2 types),
DC current (2 types) and DC voltage (4 types), and the unit
• When changing the input from DC voltage to other inputs, remove the sensor connected to
this controller first, then change input type.
• (+) side input terminal number of 0 to 5V DC, 1 to 5V DC, 0 to 10V DC differs from
that of 0 to 1V DC.
(+) side input terminal number of 0 to 5V DC, 1 to 5V DC, 0 to 10V DC: 9
(+) side input terminal number of 0 to 1V DC: 10
[26] Scaling high limit setting
• Sets scaling high limit value.
• Setting range: Scaling low limit value to input range high limit value
[27]
Scaling low limit setting
• Sets scaling low limit value.
•
Setting range: Input range low limit value to Scaling high limit value
[28]
Decimal point place selection
• Selects decimal point place.
Available only for DC input.
•
key while pressing
or
Name, Function, Setting range
K -200 to
K -200.0 to 400.0
J -200 to
R 0 to
S 0 to
B 0 to
-200 to
E
T -200.0 to 400.0
N -200 to
PL- 0 to
C(W/Re5-26) 0 to
Pt100 -200.0 to 850.0
JPt100 -200.0 to 500.0
Pt100 -200 to
JPt100 -200 to
4 to 20mA DC -2000 to 10000
0 to 20mA DC -2000 to 10000
0 to 1V DC -2000 to 10000
0 to 5V DC -2000 to 10000
1 to 5V DC -2000 to 10000
0 to 10V DC -2000 to 10000
DC voltage, current input: -2000 to 10000 (The placement of the decimal
DC voltage, current input: -2000 to 10000 (The placement of the decimal
: No decimal point
: 1 digit after the decimal point
: 2 digits after the decimal point
: 3 digits after the decimal point
key for approximately 3 seconds in the PV/SV
key, then register the value with
K
1370 K
K
1000 J
1760 R
1760 S
1820 B
800 E
T
1300 N
1390 PL-
2315 C(W/Re5-26)
Pt100
JPt100
850 Pt100
500 JPt100
1370
point follows the selection.)
-200
point follows the selection.)
No decimal point
18
key.
Default value
to
(-200 1370 )
/ can be selected as well.
-320 to
-320.0 to
-320 to
0 to
0 to
0 to
-320 to
-320.0 to
-320 to
0 to
0 to
-320.0 to 1500.0
-320.0 to
-320 to
-320 to
2500
750.0
1800
3200
3200
3300
1500
750.0
2300
2500
4200
900.0
1500
900